As a custom woven shirts manufacturer in bangladesh, Siatex Bangladesh makes wholesale woven shirts for menswear brands and shirt specialists: a lavender oxford shirt with a button-down collar, a chest pocket and a curved hemmed bottom, graded by neck size from 37 to 46. A dress shirt is bought by its collar, so this page is built around neck grading accuracy and collar construction that survives the wash.
Materials: Woven oxford cloth with its fine basket weave, in a cotton rich blend for body and easy care. Every cloth lot is checked for even colour, clean weave and steady weight before cutting, and the collar interlining is matched to the collar style so points stay crisp.
Functionality: The shirt is built for formal wear: a fused collar that holds its roll, cuffs that close clean, a placket that sits straight, and a shade that stays even across a whole size range so a rail of shirts reads as one colour.
Size: Neck sizes 37 to 46, graded across the range with sleeve lengths set per size. Collar, chest, sleeve and length measurements are checked on finished shirts from every neck size, and your own size chart can be followed where your market measures differently.
Customisation: Your woven label inside the back neck, your colours, collar and cuff styles, ratio packing by neck size, and your carton marks. The full specification is approved on the sample before bulk.
Get Price: Send your shirt style, colours, neck run and sleeve plan through our contact page and a custom woven shirts manufacturer in bangladesh will reply with a quotation and a sample plan for your shirt programme.
Custom Woven Shirts Manufacturer in Bangladesh – Oxford Weave, Button-Down Collars and Wholesale Details
A woven shirt is judged at the collar before anywhere else. The customer buttons the neck, checks the size against the label, and feels whether the collar stands or wilts. Across a wholesale range of ten neck sizes, that collar has to be built the same way on the smallest and the largest, which is a construction discipline before it is a sewing one.
The shirt shown here is the classic formal build: lavender oxford, a button-down collar, a button front with white buttons, one chest pocket, long sleeves with button cuffs and a curved hemmed bottom. The collar points button down clean and the placket runs straight.
Lavender leads the colour story shown here, a modern formal colour. Your own colour set runs across the same pattern, each colour approved as a finished shirt before bulk.
Oxford Body
- Woven oxford with a fine basket weave
- Clean even face across the body
- Shade matched panel to panel across the run
- Cloth weight steady from lot to lot
Button-Down Collar
- Fused collar holding its shape and roll
- Points buttoning down clean and even
- Collar size true to the neck label
- Interlining matched to the collar style
Placket, Pocket and Cuffs
- Button front placket stitched straight
- One chest pocket placed true on the left
- Long sleeves with button cuffs
- Buttons matched and sewn to hold
Curved Hemmed Bottom
- Curved hemmed bottom, stitched evenly
- Hem sits clean tucked or untucked
- Side seams finished without puckering
- Length checked on every neck size
Neck Run and Fit
- Neck sizes 37 to 46 in one graded pattern
- Every size checked against the same standard
- Fit approved on the pre-production sample first
- Your own size chart followed where you supply one
Woven Shirts Supplier in Bangladesh for UK Brands
As a custom woven shirts manufacturer in bangladesh, we build the programme around the shirt specialist’s own measures. A brand sells the collar size, the sleeve length and the collar style as one promise, so the grading is settled at the pattern stage, sampled at both ends of the neck run, and only then cut in bulk.
The three buyers judge the shirt differently. The brand watches collar truth across its size chart. The specialist watches the collar construction, because his customer compares it with shirts three times the price. The wholesaler watches ratio packing by neck size. One pattern record serves all three.
Every order is made to order in Bangladesh. Nothing is pulled from open stock, so the colours, the collar style, the labels and the neck ratios all follow your specification from weaving to carton.
How a Woven Shirt Order Runs from Loom to Shipment
An order starts with your shirt style, colour set, neck run and sleeve plan. The factory prepares the oxford, checks its shade, and makes a pre-production sample in the smallest, middle and largest neck sizes, so grading is judged across the run before the season’s production is cut.
Approving those samples is how the order is settled before any bulk cloth is cut. Your comments on collar roll, shade or pocket position are worked into the samples first, and bulk production follows the approved samples as the standing reference.
During production the shirts are checked at cutting, sewing and finishing. Finished shirts are measured across the neck run, pressed and folded to your plan, and the shipment is checked before it leaves.
Woven Shirts Factory in Bangladesh – Oxford Weave, Collar and Shade Checks
The oxford is checked first as cloth: basket weave even, shade even, and a clean surface with no slubs. Collars are checked as they are built: interlining fused evenly, points matched pair to pair, and the finished collar measured against its neck size before the shirt is closed.
Shade control across a whole range matters most on formal colours, which are worn against suits and compared under shop light. Panels are matched before cutting, and any lot that shades off the standard is not used.
Buyers who follow fibre standards can read about the programme at Better Cotton, whose work supports more sustainable cotton production and is widely referenced on shirting programmes.
| Product | Men’s woven dress shirt, long sleeve |
|---|---|
| Cloth | Woven oxford, basket weave |
| Collar | Button-down collar, fused |
| Front | Button front with white buttons |
| One chest pocket, left side | |
| Bottom | Curved hemmed bottom |
| Sizes | Neck sizes 37 to 46 |
| Custom options | Label, colours, collar style, neck ratio packing |
Neck Sizes and Sleeve Lengths to Plan
Neck grading is the quiet work a shirt programme stands on. The collar grows size by size, and the chest, shoulder and sleeve have to grow with it in the right proportions, or the largest sizes wear like a different shirt. Here the grade rules are written into the pattern, sampled at both ends of the run, and measured again on finished shirts before packing.
Sleeve lengths are planned the same way: lengths are set per neck size in your chart, measured on samples from every size, and marked clearly on the carton so your warehouse stocks by neck and sleeve without opening bundles.
Our quality assurance page sets out how these checks run through production and packing, from the first sample to the sealed carton.
Sizes, Colours and Packing from Your Woven Shirts Supplier in Bangladesh
The standard run is neck sizes 37 to 46 with sleeve lengths set per size, graded from a measured base pattern so the collar, pocket and hem proportions stay right at every size. Shirt buyers feel grading faults at the first fitting, so every size is checked against the sample, not just the middle neck.
Lavender is the standing colour on this page. Formal colours carry a shirt range, so each colour in your set is approved as a finished shirt before bulk and held as a kept standard, ready for the season reorder.
Packing follows your plan: shirts folded with boards and collar supports, single shirts in polybags, or boxed presentation for retail. Brands building a wider menswear range often pair the shirts with knit polos from our polo shirts manufacturer in Bangladesh range on the same shipment.
Private Label Woven Shirts from a Wholesaler in Bangladesh
Your woven label is sewn flat at the centre inside the back neck, below the collar, where a shirt brand’s name belongs. Neck size and care content can sit on the same label or on a second label below it, worded for your market.
Polybag print, hang tags and outer carton marks can all carry your artwork and your size marks. The full label and packing set is approved with the pre-production sample, so nothing is improvised later in the run.
As a custom woven shirts manufacturer in bangladesh we hold your grade rules, collar specification and colour standards on file, so a repeat order carries exactly the same build as the first delivery your customers fitted.
Where We Ship Your Woven Shirt Order
The United Kingdom leads this programme’s shipments, and woven shirts from this factory also ship regularly to Germany, the United States, the Netherlands, France and Spain. Packing is built to each buyer’s neck ratio and warehouse plan.
United Kingdom
British menswear brands and shirt specialists take full neck runs with sleeve splits, packed by ratio. Carton marks carry neck and sleeve in the buyer’s format for direct warehouse intake.
Germany
German buyers check collar measurements size by size at inspection and set exact label wording. The full run ships from one production run so the season’s stock matches.
United States
American shirt brands set their own neck and sleeve charts, followed from the sample stage. Core colours are held as standards so reorders join the rail without a visible join.
Netherlands
Dutch importers distribute formal shirts across European retail from one shipment, with cartons split by market. Grading is recorded with the order for exact repeats.
France
French menswear buyers judge collar roll and cloth hand first, both settled at the sample stage. Samples are approved per colour before the bulk run.
Spain
Spanish buyers take the same build with their own labels and colour sets, lavender leading. Shade is held across the full neck run.
Woven Shirt Maker in Bangladesh – Quality Checks Before Dispatch
Checks run at three points: the pre-production samples against your specification, inline weave, collar and shade checks while production runs, and a final check of finished shirts and cartons before the shipment leaves. Measurements, shade and labels are read against the approved samples throughout.
The collar check is the one that matters most on a shirt order: finished collars are measured against their neck labels and the points checked pair to pair, because the collar is the first thing the customer tests.
Cartons are checked against the order before the shipment leaves: counts by neck and sleeve, pack formats and carton marks all read against your packing plan.
Why Brands Choose a Woven Shirts Factory in Bangladesh
Shirt programmes reward a factory that sews woven shirts every week and keeps its grade rules written down. Bangladesh gives brands that depth of woven production at a fair cost base, with the collar, cuff and placket skills a formal shirt needs. Programmes often add knit basics through our t-shirt manufacturer in Bangladesh line for the same stores.
Working with a Bangladesh woven shirt maker that keeps your grade rules, collar specification and checks on record means every repeat is verified against the first approved samples, not rebuilt from memory.
Siatex keeps the whole build in one place, from cloth checks to the final sealed carton, so questions are answered by the team that made the shirts. That single line of responsibility is what long term shirt programmes are built on.
Care and Press Life of a Woven Shirt
An oxford shirt keeps its collar and colour when it is washed at the temperature on your label, dried away from hard heat and pressed with the collar shaped, and the care content says so in plain words. The fused collar is built to hold its roll through that cycle.
Because the grade rules, pattern and colour standards are recorded for your programme, a repeat order matches the stock your retailers already hold. A customer buying his second shirt in the reorder finds the same collar he fitted the first time.
Buyers adding warm layers for the same stores can source them from our hoodies manufacturer in Bangladesh range alongside the shirt order. One factory contact across the range keeps your sourcing simple.
Frequently Asked Questions
Which neck sizes can German buyers order?
Neck sizes run from 37 to 46 on one graded pattern, with sleeve lengths set per size. Your own size chart can be followed where your market measures differently.
Can sleeve lengths vary by size?
Yes. Sleeve lengths are set in your size chart per neck size, sampled at both ends of the run, and measured again on finished shirts before packing.
Which collar styles run on the programme?
The button-down collar is the lead style shown here. Cutaway, classic point and other collar styles are built on the same fused construction and sampled for approval before bulk.
What colours can Dutch retailers order?
Lavender is shown here as the lead formal colour. Your own colour set runs across the same pattern, each approved as a finished shirt before bulk and held as a standard for reorders.
How do we start an order?
Send your shirt style, colour set, neck run and sleeve plan through the contact page. Approving the pre-production samples is how brands settle the work of a woven shirt order before any bulk cloth is cut.












