Head Office & Factory: Dhaka, Bangladesh | Sales Office: Canada (02) 222-285-548 [email protected]
Fully Customizable

Custom Mens Black and Red Zip Hoodie Manufacturer in Bangladesh

As a black and red zip hoodie manufacturer in Bangladesh, Siatex sews the two-tone zip hoodie to your standard: your colours, your fit, your measurement and your label, made to order for brands in Denmark, Sweden, Norway, Germany and the Netherlands.

Materials - Heathered charcoal fleece body with a smooth black yoke, in your weight

Functionality - Full-length red zip closed, two low zip pockets, flat red cuff bands

Size - Chest and body sizes graded on your own measurement chart

Customisation - Your label, your colours, your fit and your packaging

Get Price
Black and red zip hoodie manufacturer in Bangladesh mens heather charcoal fleece front view

Black and Red Zip Hoodie Manufacturer in Bangladesh for Two-Tone Fleece Programmes

As a black and red zip hoodie manufacturer in Bangladesh, Siatex sews the two-tone zip hoodie your fleece wall reads from across the shop: a heathered charcoal body under a smooth black yoke, carried by a bright red zip, red pocket tapes and red cuff bands.

A two-tone zip hoodie is judged on its lines before anything else, because your customer reads the seam and the red zip first; a yoke seam that wanders or a zip that ripples breaks the whole effect, whatever the fleece feels like in the hand.

A Smooth Black Yoke Above the Heathered Body, One Straight Seam

The chest and shoulders are cut in smooth solid black fleece, divided from the heathered charcoal body by one straight seam running level across the chest, with fine panel seams dropping from it to the hem on either side of the zip.

Seam placement is measured against the sealed sample on pulled units, because on a wholesale black and red zip hoodie manufacturer programme a yoke seam placed a centimetre high changes the proportion of the whole front, and proportion is what this design sells.

A Full-Length Red Zip, Closed Flat From Hem to Neck

The centre front carries a full-length bright red zip, presented completely closed and flat, running from the hem to the neck in one bright line that divides the two blacks and organises the whole front around itself.

Zip runs are tested on pulled units at the audit, opened and closed repeatedly, since a zip that catches in the first week is the fault your buyer hears about; the wider zip-front discipline sits across our zip up hoodie manufacturer in Bangladesh programme.

Two Vertical Zip Pockets With Red Tape, Low on the Front

Two low front pockets close with vertical zips on bright red tape, one on each side of the centre zip, so the storage sits inside the design language of the garment instead of breaking the heathered field with a pouch.

Pocket zips are run-tested on pulled units and their ends bar-tacked, since a pocket zip that splits its stop is a return, not a repair, on a garment whose whole value sits in the straightness of its lines.

Red Cuff Bands and a Plain Black Hem to Close the Body

Each sleeve ends in a narrow flat band of bright red, answering the zip and the pocket tapes, while the hem closes the body straight and plain in black, so the red appears exactly where the design places it and nowhere else.

Band placement is measured on the sealed sample and held across the batch, because a band that sits high on one cuff and low on the other is exactly the kind of small drift your customer’s eye finds in the fitting room.

A Black Hood Lying Flat, Its Red Lining Showing at the Neck

The hood is black outside with a bright red lining, attached around the neck and resting flat behind it, so a band of red shows at the neckline and ties the top of the garment to the zip below it.

The hood pattern is cut to sit, not to stand: as an OEM black and red zip hoodie manufacturer we check every sample hood lying flat before it is approved, because a hood that bunches or spreads behind the shoulders spoils the line of the whole garment.

Your Label Inside the Neck, Your Brand on the Rail

Your woven label sits inside the back neck, and your swing tags, polybag and carton marking carry the hoodie to your warehouse under your name alone, with your barcode labels and size stickers set to your system before the cartons close.

  • Your woven label inside the back neck
  • Your swing tags, barcode labels and size stickers
  • Your polybag print and folding style
  • Your carton marking and size-ratio packing

Label, tags and packing are all approved on the counter sample before bulk cutting begins, which is the working habit of an OEM black and red zip hoodie manufacturer programme: nothing in the carton names anyone but your brand when your warehouse opens it.

Two-Tone Zip Hoodies Graded on Your Own Measurement Chart

The regular block is graded on your own measurement chart rather than stretched from one size, so the chest, the yoke seam position and the body length keep the same proportion at every size, and the largest hoodie on the rail reads as the same garment as the smallest.

On a wholesale black and red zip hoodie manufacturer programme that grading is recorded once and held for the life of the style, which is why a size added for a later drop is cut from the same proportions instead of being redeveloped from a photograph.

How a Two-Tone Order Runs, From Counter Sample to Sealed Standard

Before bulk, your black and red zip hoodie manufacturer in Bangladesh sews a counter sample to your measurement chart and your colour standards, both blacks and the red together, and sends it for your approval, because a panelled garment is judged as one piece.

  • Counter sample sewn to your chart and all three colour standards
  • Your comments folded into fit, panels and fleece together
  • Approved sample sealed as the production reference
  • Bulk sewn and checked against that sealed sample
  • Packed to your ratio and dispatched on your window

Nothing is cut for production until that sample is approved, and every order is then sewn to order, never taken from a shelf of finished hoodies waiting for a buyer; your custom zip hoodie factory in Bangladesh then folds, tags and cartons to your specification, with the packing list shared before dispatch.

Checks That Keep Both Blacks and the Red Inside Their Standards

As a black and red zip hoodie exporter in Bangladesh, we check after sewing, after finishing and again before packing, because a two-tone garment shows every drift: a stepped heather, a wandering yoke seam or a rippled red zip is visible from across the room.

  • Both blacks and the red compared against their sealed standards
  • Yoke seam position measured on pulled units
  • All three zips run-tested on pulled units
  • Measurement audit against your chart on finished units

On a wholesale black and red zip hoodie manufacturer run, pulled units are compared against the sealed sample, any unit whose colour or seam has stepped outside the standard is pulled out, and the audit results stay recorded against your specification for the reorder.

A Bright Red That Survives the Wash It Will Live In

A bright trim is washed often and judged harshly, so the batch is wash-tested before dispatch, checking the red for fade and for colour lift onto lighter garments, at the zip, the pocket tapes and the cuff bands.

The same testing re-measures the body after washing, because a hoodie that shortens at the hem stops being the fit your customer bought; the neon end of the same zip discipline sits on our black neon hoodie programme in an all-black block.

Folded Flat With the Zip Closed, Ratio Held to the Carton

The hoodie is folded with the zip closed and the hood lying flat inside the fold, because a yoke creased sideways for six weeks in a carton arrives needing attention before it can face a customer, and a brand-new garment should never ask for it.

Your black and red zip hoodie supplier in Bangladesh holds the size ratio from the cutting table to the sealed carton, and the packing list travels before dispatch with the audit results, so your goods-in team has the full picture while the cartons are still on our side of the water.

A Two-Tone Zip Hoodie in a Core Fleece Programme

Most fleece walls carry one dark two-tone style lifted by a single bright idea, and this red-zipped hoodie is built for that position: dark enough to sit beside everything in the drop, bright enough to be the piece the season is photographed around.

Because all three colour standards are sealed, a buyer can extend the set in a later drop without redeveloping the shades, and the hoodie keeps selling while the newer pieces find their place on the wall beside it.

Delivery Windows Planned Around the Fleece Season

The programme ships to its lead markets on repeating seasonal schedules, with cutting slots confirmed in writing before bulk begins and your delivery date planned backwards from the rail date your buyer is working to for the season.

Two-Tone Zip Hoodies for Danish and Swedish Fleece Ranges

Danish and Swedish ranges run this hoodie as the dark lead of the fleece wall, ordered beside brighter colour-block styles on the same block, and repeated while the sealed colour standards hold the set together through the season.

Two-Tone Zip Hoodies for Norwegian and Wider Programmes

Norwegian programmes take the same hoodie into their own season, reordering inside their windows; the wider programme also serves Germany, the Netherlands, Canada, the USA and Australia on their own fleece schedules.

Why Buyers Choose This Black and Red Zip Hoodie Manufacturer in Bangladesh

Siatex has sewn in Bangladesh since 1987, and we are members of the Bangladesh Garments Buying House Association; the same panel discipline in a pullover sits on our wider hoodie programme, where panels, zips and labels are all set to the buyer’s own artwork.

Your black and red zip hoodie supplier in Bangladesh keeps your colour standards, your measurement chart and your panel specification filed together on one document, so a repeat order starts as a single instruction, and working with a custom zip hoodie factory in Bangladesh means one desk answers for colour, fit and delivery together.

Reorders That Match the Hoodie Already on Your Customer’s Rail

A lead fleece style lives on continuity: the reorder hangs beside last season’s units in your customer’s wardrobe, and a red that has moved shows the moment the two are compared side by side in daylight.

That is why the sealed colour samples, the panel specification and the measurement chart stay filed together, and why pulled units from every new batch are compared against them before the cartons close, so your buyer reorders with one instruction.

Questions Buyers Ask Before Ordering a Two-Tone Zip Hoodie

Can the red be changed to our own accent colour?

Yes. The accent colour is set on your specification at sampling rather than fixed by us: send your colour reference for the zip, tapes and bands, and the counter sample is sewn in your accent and sealed on your approval.

Can we put our own label and tags on the hoodie?

Yes, that is the standard route from the first counter sample onward: your woven label inside the neck, your swing tags, your polybag and your carton marking, with nothing naming us instead of your brand anywhere on the garment.

Will the two blacks stay distinct across the whole batch?

Both blacks are held to sealed colour standards approved by you at sampling, panels are compared before cutting, and pulled units are checked against those standards, so the yoke and the body keep their intended contrast on every unit.

Can the yoke seam sit higher or lower?

Certainly. Seam position is set on your specification at sampling; a yoke seam at a different height is sampled on the counter sample if your buyer prefers it, and the sealed sample records the approved version for bulk.

How do we start, with a sample in our own sizes?

Send your measurement chart and your colour references, and the counter sample comes first in your own sizes; as your black and red zip hoodie exporter in Bangladesh we then seal that approved sample as the reference standard for bulk.

Can we see the batch before the goods are dispatched?

Yes. Photographs of your own batch at sewing and at packing are shared whenever you ask for them, and the final audit results travel with the packing list before the goods leave, so the colours and the fit are never a surprise.

Start With a Sample Hoodie Sewn to Your Own Standard

Send us your measurement chart, your colour references and your label artwork, and the first hoodie will be sewn to your standard, so the bulk decision is made on a real garment in your hand; the bulk is then made to that order, piece by piece, only after your approval.

Use the Get Price route to open the conversation; your quality, your fabric, your design and your measurement lead from there, and the sealed standard we build together carries every fleece reorder after it, season after season, without any colour ever drifting.