Head Office & Factory: Dhaka, Bangladesh | Sales Office: Canada (02) 222-285-548 [email protected]
Fully Customizable

Custom Men’s Royal Blue and White Hoodie Manufacturer in Bangladesh

As a custom mens royal blue and white hoodie manufacturer in bangladesh, Siatex builds this hoodie at your level: your royal blue over soft off-white, your smooth fleece, your regular fit and your sizes graded on your own measurement chart.

The design is a horizontal colour block pullover: royal blue across the hood, upper chest and full sleeves, soft off-white below a straight junction line at mid-chest finished with a narrow white stripe and a thin blue pinstripe, a wide kangaroo pocket, white flat drawcords and off-white ribbed cuffs and hem.

Materials - Smooth matte sweatshirt fleece with a soft brushed back, in a weight set by your market, with the blue carrying a faint heather.

Functionality - A roomy self-lined hood, a kangaroo pocket for hands and carry, and ribbed cuffs and hem that hold the garment's shape in wear.

Size - Regular straight fit at hip length, graded from your own size chart, with the block line placed as a proportion of body length on every size.

Customisation - Your two colours in any pairing, your line position, your label woven and sewn inside the back neck, and your chest print or embroidery placed on the blue panel.

Get Price
Custom Mens Royal Blue and White Hoodie Manufacturer in Bangladesh pullover with blue hood and off-white body laid flat front view

Custom Mens Royal Blue and White Hoodie Manufacturer in Bangladesh for Colour Block Ranges in the UK and USA

Some hoodies hide in a rail of grey. This one stands at the front of it: a clear royal blue across the hood, chest and sleeves, a soft off-white below a straight line at mid-chest, and a narrow white stripe with a thin blue pinstripe marking exactly where the two colours meet.

The block is the whole design, so it has to be sewn straight. The junction line is level from side seam to side seam, the stripe sits flat without a ripple, and the off-white below it is warm enough to read clearly against a white product page while the blue above stays clean and bright.

A Hoodie Built Around One Straight Line

Everything on this garment serves the horizontal split. The hood, yoke and sleeves are cut from the blue cloth, the body below the line from the off-white, and the two are joined at mid-chest where the eye naturally rests.

Curved raglan seams run from the neck down to the underarms, giving the shoulder a soft athletic line. They are sewn in the blue panel only, so the colour work stays clean and the block below the line is never interrupted.

Inside the Pattern Room in Bangladesh

The pattern is graded from your own size chart, with the junction line placed as a proportion of the body length rather than a fixed measurement. A line that sits at mid-chest on a medium would ride too high on an extra-large if it were pinned to one number.

Markers are laid so the line meets itself exactly at both side seams. A block that steps by even a few millimetres at the seam is the first thing a buyer’s quality check will catch, so the cut panels are checked against each other before sewing starts.

The Hood, Cords and Kangaroo Pocket

The hood is generously cut and sewn from the same royal blue fleece inside and out, so it frames the face in one colour. Two thin flat white cords hang from the opening with small dark tips, the only detail on the blue chest.

  • A wide kangaroo pocket in off-white, centred low on the front
  • Diagonal slide-in openings at the pocket’s upper corners
  • Short off-white ribbed cuffs at the end of blue sleeves
  • A wide off-white ribbed band closing the hem

The pocket is part of the white block, not an addition to it. Its top edge sits below the junction line and its bottom edge just above the hem band, topstitched all round so it lies flat in the pack.

Fleece Weight Set by Your Market

The cloth is a smooth matte fleece with a soft brushed back, and its weight is set by where the hoodie will be sold. A lighter loopback suits spring ranges and layered looks; a heavier brushed fleece suits winter programmes in Northern Europe and Canada.

Both colours are dyed to your swatch, and the blue carries a faint heather that keeps a large flat panel from looking flat in photographs. Strike-offs of both colours arrive together, because a block design is judged on the pair, not on either colour alone.

How the Two Colours Are Matched in Dyeing

Colour blocking lives or dies in the dye house. The royal blue and the off-white are dyed in the same programme window so their hand feel and shrinkage match, and panels cut from different dye lots are never mixed inside one garment.

Each lot is checked under daylight and store light before cutting. A blue that leans purple under shop lighting would break the design on the rail, so any lot that shifts tone is held back before it reaches the cutting table.

The Stripe and Pinstripe at the Junction

The narrow white stripe at the junction is a separate knitted band, sewn between the two panels rather than printed on top of them. It gives the line a finished edge, and the thin blue pinstripe along its lower edge ties the band back to the upper colour.

Because the stripe is a real component, it can change with your programme: widen it, drop the pinstripe, or run the stripe in the lower colour. Each version is sampled, because a band that looks right on a drawing can sit differently once it is sewn between two fleece panels.

How the Hoodie Wears and Washes

The fleece is pre-shrunk before cutting, so the block line stays where the pattern put it after washing. A line that creeps upward as a garment shrinks is a known fault in blocked styles, and it is designed out here rather than inspected for later.

The ribbed cuffs and hem band carry elastane in the rib so they recover after wear. Care labels carry your instructions, and the two colours are tested together for colourfastness, since a blocked garment is washed as one piece and must stay true as one piece.

Your Label Inside the Hood

The label picture in the gallery shows how your brand is carried: a black woven label with your name in white capitals, sewn inside the back neck under the hood. The hood folds over it in wear, so the branding is private until the wearer looks for it.

Hangtags, printed neck tape and packaging follow the same artwork. Send the files once and every unit in the order carries your label in the same place, folded and pressed the same way.

Customisation Beyond the Block

The block itself is yours to redraw. Move the line higher or lower, swap the colours, run the white above and the blue below, or add a third band: the pattern room works from your drawing, and the sample comes back photographed on a white ground so you judge the block exactly as your customers will see it.

Chest embroidery and prints are placed on the blue panel, where a dark or white mark reads cleanly. Your artwork can also sit on the pocket or the back; placement prints are positioned on the sample for your approval before bulk sewing begins.

Fit, Sizes and the Size Chart

The fit is regular and straight, hip length, with full sleeves to the wrist. Sizes run from your chart: send measurements in inches or centimetres and the grading follows them across the run, including where the junction line falls on each size.

Tall and extended sizes keep the same proportions rather than simply adding length at the hem. The pocket, the line and the hem band all scale together, so a full size set looks like one design in several sizes, not several designs.

Production and Quality Control in Bangladesh

Production runs on our floor in Bangladesh under one roof: cutting, sewing, finishing and packing in sequence. The junction seam is checked panel by panel at the inline stage, while a misaligned line can still be corrected without unpicking a finished garment.

Finished hoodies are measured against the size chart, pressed and folded with the cords laid straight. A final audit samples the cartons for colour consistency between the two blocks, because a shade drift between blue panels is most visible once garments are packed together.

Who Buys This Hoodie

The style suits streetwear and casual ranges that need a strong colour story without a print. Retailers in the United States, the United Kingdom, Germany and Australia order it as a statement piece inside a plain range, where one blocked hoodie lifts the whole rail.

It also works for team and campus programmes that want colours carried as blocks rather than logos. The blue-over-white arrangement can follow a club’s colours, and the same pattern takes any two-colour pairing your programme needs.

Other Hoodies Sewn on the Same Floor

Our light grey hoodie is the plain classic of the same family, and the tomato red and white zip hoodie carries its colour on the sleeves instead of a horizontal block. For the shirt rail, the blue, white and yellow check shirt covers the woven side of a colour-led range.

The wider hoodie and fleece programme is set out by the International Trade Centre, whose market data many of our buyers use when planning colour stories for a season. Its research on apparel demand in Europe and North America is a useful starting point for range planning.

Sampling and Approval

Samples are made in your colours, at your line position, with your label sewn in. Photographs on a white ground come first for a quick read of the block; the physical sample follows for hand feel, fit and shade under your own lighting.

Approvals are recorded against the sample, so the bulk is sewn to the garment you held. Any change you ask for, a lower line, a wider stripe, a heavier fleece, is made on a revised sample before production, never improvised on the floor.

Packing, Cartons and Delivery

Hoodies are folded singly into polybags with the cords tucked straight, then packed to your carton plan by size or by colour story. Carton marks, barcodes and assortment ratios follow the instructions in your order file.

Delivery is planned backwards from your selling date, with the sample and approval stages given their own time in the schedule. You receive one programme with named stages rather than a stream of small updates, and each stage is confirmed as it completes.

Questions Buyers Ask About This Block Hoodie

Can the line sit higher or lower? Yes: the junction is placed as a proportion of body length from your drawing, and the sample confirms the position on a real garment.

Can the colours be reversed or changed? Yes: any two colours from your swatches can carry the block, and the stripe and pinstripe follow the pairing. The pattern is built for two-colour work, so a new pairing needs no new development.

Is the hood lined? The hood is self-lined in the same blue fleece, inside and out. A contrast lining in the lower colour is possible as a custom option and is shown on the sample.

Private Label Programmes and Reorders

Most buyers stock this style as a seasonal colour piece and reorder it in a new pairing the following season. The pattern, grading and label setup are kept on file, so a reorder in fresh colours starts from the approved sample rather than from a blank page.

Your programme file holds the line position, the stripe build and the shade references for both colours. When the new pairing arrives, strike-offs are matched against the file and the first sample is checked against the original garment side by side.

Start Your Colour Block Programme

Send your two colours, your line position and your size chart, and the first sample comes back blocked exactly as drawn. From the first strike-off to the final carton, this hoodie is made at your level: your quality, your fabric, your design and your measurement.